In addition to hanging a large number of bulky chandeliers and wall lamps, lamps such as table lamp floor lamps can be installed by themselves. Although the installation method of each luminaire will vary slightly depending on the product design, it is often the same. We only need to pay attention to the following points when installing the floor lamp:
1. Read the installation drawings carefully before installation and prepare common tools such as flat-mouth screwdrivers and hoes. It is best not to confuse after unpacking parts. If there are more similar parts, the drawing will draw a comparison of the physical size, and the unused parts will be forked, making it easy to distinguish the various parts.
2. If the board is damaged during the inspection, you can contact the merchant's replacement. If you want to install screws, eccentric parts, and wooden shafts, the guide holes will be opened, so you don't have to worry about the positioning of the parts. It should be noted that it is not necessary to accidentally twist the parts and then repeatedly screw them together. Otherwise, it is easy to damage the board. If it is installed, it will often appear unstable and inclined.
3. Generally, the floor lamp should have a cast iron chassis, which is slightly smaller than the surface base. The order of the parts from bottom to top should be: chassis fastening nut, cast iron chassis, base, lamp post, lamp cap, lamp cover, plastic fasteners, light bulb.